The product line of the Company originally included the implant sizes that could cover most clinical events. Designers and clinicians have conducted a detailed analysis of required shapes, diameters and lengths, in consequence of which we can maintain that with Bauer’s Implants implants it is easy to achieve the most predictable positive results during rehabilitation of patients.
All implants in a linear series have exactly the same taper shape (in the context of one given diameter) along the length from the neck to a distance of 6 mm.
Dentinium implants Ø 3.5
| Vendor code | IH 35070 | IH 35085 | IH 3510 | IH 35115 | IH 3513 |
| L (мм) | 7.0 | 8.5 | 10.0 | 11.5 | 13.0 |
| Ø (мм) | 3.5 | ||||
It provides the same strength in the entire linear series and stability of clinical and physical parameters, regardless of the length of implant used. When performing the fatigue test, the weak section of all implants is measured at a distance of 3 mm from the implant neck. Therefore, it’s fair to say that the cross section of all implants to diameter in a linear series is equally reliable and equal in strength.
Besides, according to clinical studies, the first 6 mm of implant length have a dominant role in osseointegration.
Dentinium implants Ø 4.0
| Vendor code | IH 35070 | IH 35085 | IH 3510 | IH 35115 | IH 3513 |
| L (мм) | 7.0 | 8.5 | 10.0 | 11.5 | 13.0 |
| Ø (мм) | 3.5 | ||||
Dentinium implants Ø 4.5
| Vendor code | IH 45070 | IH 45085 | IH 4510 | IH 45115 | IH 4513 |
| L (мм) | 7.0 | 8.5 | 10.0 | 11.5 | 13.0 |
| Ø (мм) | 4.5 | ||||
All implants are completed with a closure screw
| Vendor code | CS 2040 |
| L (мм) | 8.0 |
| Ø (мм) | 3.5 |
All implants are completed with a closure screw
Length (L) should be understood to mean the length of implant. Drills are marked 0.5 mm longer than the implant length, which corresponds to the principle of implant installation 0.5 mm below the cortical layer. Diameter (Ø) should be understood to mean the average diameter over the total length of implant.
Usage protocol
