Saardent’s Implants introduces a multi-unit system that expands the range of options for doctors and their patients.
The use of multi-unit abutments allows fixing the prosthetic structure using screw fixation, without the use of cement, which in turn makes it possible to remove the prosthetic structure if necessary.
Multi-units are used for prostheses supported by two or more screw-retained implants. Available in various versions: straight multi-units and angled multi-units 17 and 30 degrees with gingival heights from 1.5 to 4.5 mm.
Corner multi-units have a single orthopedic platform with a cone with a hexagon.
The recommended tightening torque for fixing the multi-unit abutment is 35 Ncm, for the prosthetic screw 15 Ncm.
Straight multi-unit abutment
Supplied with HF-STA MU holder
| vendor code | STA MU 4815 | STA MU 4825 | STA MU 4835 | STA MU 4845 |
| H (mm) | 1.5 | 2.5 | 3.5 | 4.5 |
| Ø (mm) | 4.8 | |||
Angled abutment multi-unit system 17°
Supplied with one fixing screw SF-ATA-MU-2040
| vendor code | ATA MU 1725 | ATA MU 1735 | ATA MU 1745 |
| H (mm) | 2.5 | 3.5 | 4.5 |
Angled abutment multi-unit system 30°
Supplied with one fixing screw SF-ATA-MU-2040
| vendor code | ATA MU 3035 | ATA MU 3045 |
| H (mm) | 3.5 | 4.5 |
Holders and screwdriver for multi-unit system
| Holder for straight multi-unit abutment | Holder for angled multi-unit abutment | Screwdriver for straight multi-unit abutments |
| HF-STA MU | HF-ATA MU | WF-STA MU |
Multi-unit system formers
Supplied with one fixing screw SF-AMU-1430
| vendor code | HA-AMU | HAW-AMU |
| Type of | straight | wide |
| L (mm) | 4.2 | 4.2 |
| Ø (mm) | 4.9 | 6.8 |
| d (mm) | 3.4 | 4.9 |
Transfer and analog of the multi-unit system
| vendor code | IP-AMU | LAN-AMU |
| L (mm) | 10.7 | 11.2 |
| Ø (mm) | 4.8 | 4.8 |
Temporary abutment of the multi-unit system
Supplied with two screws SF-AMU-1430
| vendor code | TC-AMU |
| L (mm) | 12.0 |
| D (mm) | 4.8 |
| d (mm) | 3.35 |
Semi-burnt cap of the multi-unit system
Supplied with two fixing screws SF-AMU-1430
| vendor code | OBS-AMU |
| L (mm) | 14.9 |
| D (mm) | 4.5 |
| d (mm) | 3.35 |
* Manufacturing material – cobalt-chrome
Titanium platform for multi-unit CAD / CAM system
Supplied with two fixing screws SF-AMU-1430
| vendor code | PF-CAD / CAM-AMU |
| L (mm) | 5.8 |
| D (mm) | 5.5 |
| d (mm) | 4.25 |
Scan abutment for multi-unit CAD / CAM system
Supplied with fixing screw SF-AMU-1430
| vendor code | SA-AMU |
| L (mm) | 13.0 |
| D (mm) | 4.8 |
* Manufacturing material – PEEK
Fixing screws
| vendor code | SF-AMU-1430 | SF-ATA-MU-2040 |
| L (mm) | 3.4 | 6.75 |
| D (mm) | 2.0 | 2.35 |
Prosthetic protocol from the multi-unit level
